1113S-WN10RT

1113S-WN10RT

Supermicro 1U 10Bays Single Processor AMD Rackmount Server
 
  • Single AMD EPYC™ 7002-Series Processor
  • Up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
    Up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
    (Board revision 2.x required)
  • 2x PCI-E 3.0 x16 (FH/HL) slots, 1x PCI-E 3.0 x16 (LP) slot
  • 2x M.2 PCI-E 3.0 (NVMe based)
  • Integrated IPMI 2.0 + KVM with dedicated LAN
  • 2x 10GBase-T LAN ports, via Broadcom BCM57416
  • 10x hot-swap 2.5" U.2 NVMe drive bays
  • 4x SATA3 drive support with additional cables (optional)
  • 750W Redundant Power Supplies Platinum Level (94%)
  • Virtualization, Cloud Computing, All Flash Storage
 
Storage configuration notice:
Hot-swap:
10x 2.5" NVMe storage devices
4 of them SAS3/SATA3 compatible
To maintain quality and integrity, this product is sold only as a completely-assembled system (with 1 CPU, minimum 8 DIMMs, 1 NVMe). Recommended configuration for best performance is at least 24 or 32 Cores per CPU.

Note: Image above may show a varied configuration or optional part. Please refer to parts list for standard parts included.

Configure Options

CPU
MEMORY
NETWORK CARD
OPERATING SYSTEM
WARRANTY
(Optional) Enterprise-Class HDD/SSD
NVMe M.2
NVMe U.2/U.3

Technical Specifications

Processor
CPU:
Single AMD EPYC™ 7002-series Processor
Socket SP3
 
Cores:
Up to 32 Cores
 
Chipset:
System on Chip (SoC)
Memory
Memory Capacity:
16 DIMM slots
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM
8-channel memory bus
 
Memory Type:
DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
 
DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
(* Board revision 2.x required + 7002 Processors)
 
Memory Voltage:
1.2V
 
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Chassis
1U Rackmount Chassis
Dimensions
Height:
1.7" (43mm)
 
Width:
17.2" (437mm)
 
Depth:
23.5" (597mm)
Drive Bays
10 hot-swap 2.5" U.2 NVMe drive bays
Expansion Slots
PCI Express:
2 PCI-E 3.0 x16 (FH/HL) slots
1 PCI-E 3.0 x16 (LP) slot
 
M.2:
Interface: PCI-E 3.0 x2 (NVMe based)
Form Factor: 2280, 22110
Key: Onboard M-key
Number of M.2: 2
Power Supply
700W/750W Redundant Power Supplies with PMBus
Total Output Power:

700W/750W
 
Dimension (W x H x L):
54.5 x 40.25 x 320 mm
 
Input:
100 - 140Vac / 8 - 6A / 50-60Hz
200 - 240Vac / 4.5 - 3.8A / 50-60Hz
200 - 240Vdc / 4.5 - 3.8A (CCC Only)
 
+12V:
Max: 58A / Min: 0.5A (100 - 140Vac)
Max: 62A / Min: 0.5A (200 - 240Vac)
Max: 62A / Min: 0.5A (200 - 240Vdc)
(CB/CCC Only)
 
+5V sb:
Max: 3A / Min: 0A
 
Output Type:
Gold Finger Connector Mating with Molex 45984-4343
 
Certification:
Platinum Level Certified
Onboard Devices
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
 
Network Controllers:
Broadcom BCM57416 Controller
 
VGA:
ASPEED AST2500 BMC
Front Panel
Buttons:
Power On/Off button
System Reset button
 
LEDs:
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED
Input / Output
NVMe:
Up to 10 U.2 NVMe support
 
SATA:
Optional 4 SATA3 (6 Gbps) support via additional cables
 
LAN:
2x 10GbBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
 
USB:
7 USB 3.0 ports (4 rear + 2 front + 1 Type A)
 
VGA:
1 VGA port
 
Others:
1 COM port
2 SATA DOM power connectors
TPM 1.2 header
Cooling
Fans:
6 heavy-duty PWM fans with optimal fan speed control
 
Air Shroud:
1 Air Shroud
BIOS
BIOS Type:
AMI 128Mb SPI Flash EEPROM
 
BIOS Features:
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1
Operating Environment
RoHS:
RoHS Compliant
 
Environmental Spec.:
Operating Temperature:
   10°C to 30°C (50°F to 86°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)
Detailed Specification
PC Health Monitoring
 
CPU:
Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
CPU switching voltage regulator
 
FAN:
Up to 6-fan status tachometer monitoring
Up to six 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
 
Temperature:
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 6x Fan connectors
I²C Temperature Sensing Logic
 
LED:
CPU / System Overheat LED
 
Other Features:
Chassis Intrusion Detection
Chassis Intrusion Header

Frequently Asked Questions

Yes. Spectrum Servers offers custom configurations for all server products. Use the Configure Options section above to select processors, memory, storage and other components, or request a custom quote.

All products sold by Spectrum Servers include the manufacturer's standard warranty. Extended warranty options are available. Contact our sales team at sales@spectrumservers.com or call +1 (626) 956-0100 for details.

Lead times vary by product and configuration. In-stock items typically ship within 1–3 business days. Custom configured systems may take 5–15 business days. Contact us for specific availability and lead time information.

Yes. Spectrum Servers provides technical support for all products sold. Our engineers are available Monday–Friday 8:30AM–5:30PM PST. Reach us at +1 (800) 526-8650 or email sales@spectrumservers.com.

Yes. Volume discounts are available for orders of 5 or more units. Please request a quote or contact our sales team directly for pricing on larger orders.